Request Quote
Stylized Shelter Works Logo

SearchShelter Works

Fiberglass Buildings ProtectCritical Telecommunications Infrastructure

Custom FRP Shelters for Telecommunications Equipment

Telecommunications infrastructure relies on sensitive electronic equipment to support cellular networks, public safety communications, and data transmission. Reliable operation despite temperature extremes, moisture, wind, snow, and other environmental conditions is a must.

Shelter Works manufactures custom fiberglass-reinforced plastic (FRP) buildings that protect telecommunications equipment in demanding environments. These corrosion-resistant, low-maintenance shelters can incorporate insulation, HVAC, electrical systems, structural reinforcement, and specialized equipment supports to meet each project's requirements.

Regulator Station Blue Overlay

Public SafetyRadio Communications Equipment

Problem

DeKalb County upgraded its public safety radio network to include three new 350-foot radio towers. The county needed weather-resistant equipment shelters at each site to protect digital radio equipment and backup power systems supporting police, fire, and emergency medical communications.

The county traditionally used concrete block buildings but sought an alternative that would reduce construction costs, installation time, and long-term maintenance.

Solution

Shelter Works manufactured three identical 8' x 8' x 8' fiberglass equipment shelters, each designed to accommodate three equipment racks and associated electronics.

  • 2" foam insulation in the walls and roof
  • 19/32" OSB reinforcement in all walls, roof, and door
  • 6" fastener spacing
  • 3/4" plywood wall reinforcement in one wall to support a 250-pound equipment panel
  • Factory-installed heating and air conditioning systems for temperature control

fiberglass radio shelter, radio equipment shelter, shelter for radio equipment, fiberglass radio shelters

Result

The prefabricated fiberglass shelters provided a durable, cost-effective alternative to traditional concrete block construction. Their corrosion-resistant construction, minimal maintenance requirements, and 25-year warranty help reduce long-term ownership costs while protecting critical public safety communications equipment.

Full Case Study

Telecommunications Equipmentin Arctic Conditions

Problem

A telecommunications provider near Anchorage, Alaska, needed an equipment shelter capable of withstanding extreme winter conditions, including temperatures below 0°F and heavy snowfall.

The shelter also needed to accommodate an 8,000-pound battery system, relay racks, cable trays, and telecommunications cabling while maintaining controlled interior temperatures.

Solution

Shelter Works manufactured a 10' x 24' x 8'-6" fiberglass telecommunications shelter engineered for a 125-psf roof load and 100 MHP wind speed.

  • 3" foam insulation (R-19) in the walls, roof, and doors
  • 19/32" OSB reinforcement in all walls, roof, and doors
  • Hand-glassed interior wall seams for added strength and improved thermal efficiency
  • Reinforced Arctic floor system including steel base skid, ¾" foam, and 19/32 OSB for easy installation and added thermal protection
  • Weight distribution plate to accommodate floor loads of 1,500 pounds per square foot in the battery storage area
  • Two factory-installed 3-ton air conditioning units
  • Environmental control system operating the HVAC units, intake and exhaust fans, and motorized damper

telecommunications shelter, telecom shelter, comms shelter

Result

The completed FRP shelter provides a controlled environment for sensitive telecommunications equipment in extreme Arctic conditions. Its reinforced construction supports heavy equipment and snow loads, while the insulated building envelope and environmental controls help maintain reliable operating temperatures.

Factory integration of electrical and HVAC systems also simplified installation and reduced on-site construction requirements.

Full Case Study

RooftopCellular Communications Equipment

Problem

A cellular network upgrade in Chicago required an equipment shelter for a rooftop installation. Limited roof load capacity made the weight of traditional concrete or steel structures a significant concern.

The enclosure also needed to withstand Chicago's seasonal temperature extremes, wind, and snow that could be rapidly deployed on an existing building.

Solution

Shelter Works manufactured a lightweight fiberglass equipment shelter measuring 10'-4" x 22'-4½" x 8', weighing approximately 3,200 pounds.

  • Standard fiberglass assembly construction for lightweight, weather-resistant protection
  • Floorless design for mounting onto an existing rooftop metal skid
  • Integrated stainless steel lifting rings for crane installation
  • Fully assembled, prefabricated construction to minimize on-site work

fiberglass equipment shelter, fiberglass equipment shelters, field equipment shelters

Result

The lightweight fiberglass shelter met the project's rooftop weight requirements while providing durable protection for cellular communications equipment.

Prefabrication and the floorless design allowed the enclosure to integrate with the existing rooftop infrastructure, enabling installation in a single day and minimizing on-site construction.

Full Case Study

Fiberglass Shelters for Reliable Telecommunications Infrastructure

From public safety radio towers to Arctic communications facilities and urban rooftop installations, telecommunications equipment requires protection tailored to its operating environment.

Shelter Works fiberglass buildings combine corrosion resistance, structural strength, thermal efficiency, and design flexibility to meet these requirements. With factory-installed electrical and HVAC systems, custom reinforcement, and multiple mounting options, these prefabricated FRP shelters provide long-term protection with minimal maintenance.